Dremel(snake) PCB Drill Press

I loved the original Drill Press by daumemo. It was almost exactly what I needed.
The only catch was that I use my snake-extension on my dremel 100% of the time. So, I re-mixed his to hold the end of the snake extension.

Additionally, I didn't have any spare 8mm linear bearings sitting around, so I re-mixed the sliding base to incorporate a 3d printed IGUS style bearing. I created a sliding base to use both a 9mm linear rod (it's what I had on hand) and a standard 8mm sliding rod.

Lastly, I did away with the 3d printed base, and instead drilled & hammered the linear rods into a piece of wood. The rods hold very tight to the wood and there is no movement at all.

You'll need
- the 8mm or 9mm Sliding Frame
- the 8mm or 9mm Base Frame
- the original Handle (https://www.thingiverse.com/thing:3820589/files)
- 2x 20mm x 3mm hex bolts and nuts
- 2x pices of 8mm or 9mm linear rod
- 2x springs
- 1x piece of wood for the base

Things to note: You can also see a small piec