Drill Press Vise - Mostly Printed

Drill Press Vise Mostly Printed No Supports Two Tone Color Scheme Easily Change Grip Inserts Torque Bolt BOM Printed Parts 2X 12mm M3 Hex Socket Cap Screws* 2X M3 nuts Instructions Capitalized items are printed parts. The printed parts marked with an [a] should be printed in your accent color. Print multiples of anything with an x2 or x4 in the name. The Torque Bolt can printed instead of the Bolt_Extended. Place the Drive Collar in the vise Body, the holes should align. Screw the Bolt through the Drive Collar Place the M3 nuts in the Lower Jaw, trapped, and place it under the Bolt, cupping the ball joint end of the Bolt. Screw the M3 bolts through the upper jaw into the Lower Jaw. To ensure that your nuts don't turn in the slot, push a flathead screwdriver inside the nut trap in the Lower Jaw when fully tightening. Don't overtighten. The Lock Bolts are made to be pushed through the slots. They have a square shank that will not turn in the slide rail. You can screw them together with t