drone glider

Caracara - RC Glider / Motor gliderSimilar to the Crobe, but bigger (Wing span 930mm).Based on original design (balsa made) designed by Franck Aguerre, described here : http://lecrobe.free.fr - Look Caracara.zipRequires :Two servos like Corona DS-939MG or HK939MG (HK clone)Lipo 1S 600mAh or bigger, 2S prefered with HV servos (glider)Motor 1806-2300Kv + 10A controller + 2S-450mAh + 6x3prop or similar setupTiny 4ch receiverMain carbon rod diam. 4mm2mm balsa for elevatorSmall parts (pvc tube 2/1mm, steel rod diam 1mm...)PrintAround 150g of PLA+Printer height max 218mm (Part1_Glider), alternatively the glider fuselage can be done with Part1_Motorized + Nose for smaller printers.No support required, just some brim.Layer thickness 0.2mm - One 0.4mm wall (can be lowered to 0.36mm for part2/part3)Layer 0.12mm and line width 0.3mm for 'Light' versions of wings.'flat' wing means without dihedral, like original balsa's Caracara.Hatch/lock : layer thickness 0.15mm, 2 perimeters