Thingiverse
Druckzünder 35
par Howitzer_42
6
Téléchargements
10
Likes
0
Makes
The Druckzünder 35 (DZ 35) is a copper booby trap fuse designed to turn explosives into improvised mines.
The fuse would be armed by inserting a detonator inside the fuse well and threading into an explosive. The operator would then unscrew the safety nut from the pin and remove the pin from the fuse. The fuse would ignite if 130 - 150lbs of pressure is applied onto the cone at the top.
To complete the look, the fuse will need a 3/4" key ring for the pin and a compression spring inside the body.
The fuse would be armed by inserting a detonator inside the fuse well and threading into an explosive. The operator would then unscrew the safety nut from the pin and remove the pin from the fuse. The fuse would ignite if 130 - 150lbs of pressure is applied onto the cone at the top.
To complete the look, the fuse will need a 3/4" key ring for the pin and a compression spring inside the body.
Vous avez imprimé ce modèle ? Connectez-vous et partagez votre make !
Connectez-vous pour laisser un commentaire
Se connecterPas encore de commentaires – soyez le premier !
