Thingiverse
Music
Go to Model
Drumset Headphone Mount
9
Downloads
9
Likes
0
Makes
Did you ever had a Headphone falling down from your electronic drumkit? This was the reason for me to build one for my Roland TD1.
In the image from Cura you see, that you can perfecly lay down both parts. I want to avoid unecessary supports in my designs. This also give you the ability to print in two materials.
I started with ABS, but reprinted the clamp with TPU later.
I added a Monitor Stand purchased from Amazon, which perfectly fittet in side the Drum Racks tubes.
https://www.amazon.de/dp/B074T9Y6G2?psc=1&ref=ppx_yo2ov_dt_b_product_details
The tube diameter from the stand is 36 mm.
What do you need in addition:
Ruthex Thread Inserts M3
Hex Nut Bolt M3 x 20
Hex Nut Bolt M5 x 20
Nut M5
In the image from Cura you see, that you can perfecly lay down both parts. I want to avoid unecessary supports in my designs. This also give you the ability to print in two materials.
I started with ABS, but reprinted the clamp with TPU later.
I added a Monitor Stand purchased from Amazon, which perfectly fittet in side the Drum Racks tubes.
https://www.amazon.de/dp/B074T9Y6G2?psc=1&ref=ppx_yo2ov_dt_b_product_details
The tube diameter from the stand is 36 mm.
What do you need in addition:
Ruthex Thread Inserts M3
Hex Nut Bolt M3 x 20
Hex Nut Bolt M5 x 20
Nut M5
Did you print this model? Sign in and share your make!
Sign in to leave a comment
Sign inNo comments yet – be the first!
