Thingiverse

drunK131

by DAquad

1.5k Downloads

1.2k Likes

22 Makes

Go to Model

Racing Micro quadcopter frame drunK131

Racing quadcopters is something that I really like.

I love to design my own frames. Usually, I cut'em with my CNC but this time I wanted to try a printed one!

So I designed the drunK131 a micro category racing FPV quadcopter which turned out to be nice looking (In my opinion anyway (: ) and flies really great. What surprised me most is the durability of it.

If you would like to print a one-piece frame that looks different I think you will make a great choice here.

Frame weights 40gr.

I printed it from ABS but you can choose any other material like Petg\Nylon\PCTPE
You have to use support. Don't worry they get off easily!

The frame designed to fit Foxeer micro arrow \ Runcam micro swift
You can mount 30.5*30.5mm and 20*20mm FC's

UPGRADE: Download Micro swift cam version V2 with option to mount 1106's motors

I used some laying around electronics so the setup is really cheap!

To support my work I have included some li

2020 2020 fc 30x30 3d printer 3D printing ABS drone Drones drone racing Fast Foxeer foxeer arrow fpv fpv250 FPV Antenna fpv cam fpv camera mount fpv racer fpv racing micro micro quad micro quadcopter multicopter multirotor Multirotor Frame Nylon PETG Quadcopter Quadcopter Frame racing drone runcam thingiverse 2020 2020 fc 30x30 3d printer 3D printing ABS drone Drones drone racing Fast Foxeer foxeer arrow fpv fpv250 FPV Antenna fpv cam fpv camera mount fpv racer fpv racing micro micro quad micro quadcopter multicopter multirotor Multirotor Frame Nylon PETG Quadcopter Quadcopter Frame racing drone runcam thingiverse 2020 2020 fc 30x30 3d printer 3D printing ABS drone Drones drone racing Fast Foxeer foxeer arrow fpv fpv250 FPV Antenna fpv cam fpv camera mount fpv racer fpv racing micro

Source

Thingiverse

What you need to print this: Beginner Low confidence

Why?

print-in-place design

Print-in-place

Supports 1/3

Assembly 0/3

Settings 1/3

Bed size 0/3

Post-process 0/3

Printer

FDM / FFF

File format

STL

Material

ABS, PETG, Nylon

Min. bed size

20 mm (Small)

Software

Cura, PrusaSlicer, or similar

Frequently Asked Questions

Which 3D printer is suitable for drunK131?

Any FDM printer should handle drunK131 just fine. It's been printed on machines like Bambu Lab A1 Mini, Prusa Mini+, Creality Ender 3, most FDM printers. A minimum build volume of 20 mm is recommended.

Does drunK131 need supports when printing?

Nope — drunK131 is print-in-place, so it comes off the bed ready to use. No supports, no assembly.

What file format is drunK131 available in?

drunK131 is available in STL format. These files can be opened and sliced using free software such as Cura, PrusaSlicer, Bambu Studio, or OrcaSlicer for FDM printing, or ChiTuBox and Lychee Slicer for resin printing. The download is provided through Thingiverse.

Is drunK131 free to download?

Yes, drunK131 is available as a free download through Thingiverse. Always check the license on the original platform to understand commercial use, remixing, and attribution requirements.

No ratings yet

No comments yet – be the first!

Similar Models

6 Suggestions

drunK131

Similar Models

Add to Collection