Dry Bowser

Introducing Dry Bowser: The Ultimate Villain! What could be more terrifying than the classic Mario villain? Enter Dry Bowser, the skeletal version of Bowser, resurrected from the depths of lava! This is the largest model I’ve designed to date, towering impressively over Mario and showcasing his true power. Dimensions at 100% scale:Height: Approximately 10 inches (254 mm)Width: 10 inches Note: Scaling up is fine, but scaling down may make the eyes difficult to fit as well as some other pieces. Colors Used:Elegoo: Matte White, Orange, Yellow, RedElegoo PLA Pro: Burgundy Red (Bracelets)Geeetech: SilverBambu Basic: BlackCC3D: Bone WhiteSunlu: BurlywoodPrinting Tips: Supports: Refer to the print settings image for guidance.Cleanup: Ensure all support residue is removed from the large black shell part. Assembly Tips:Some black shell pieces may look similar but fit differently. I’ve labeled one part “R” (Right side) and another “T” (Top, towards his head).Spikes may fit tightly; twisting can help them pop into place. Some spikes might fit loosely.For the black disk and maroon neck ring, the black disk has three cut-out slots that fit into the maroon ring. The disk sits on the three slanted notches. See the provided picture for reference.When gluing the top beige shell piece to the neck ring, align it using the notch cut-out for centering.The orange horn rings are labeled “L” and “R,” with arrows indicating the direction towards the hair.The arms are labeled L and R with the side with the letters attaching to the shoulder.Assembly Steps:Build the Shell: Glue the black part to the white ring, then attach the red shell. Allow it to dry completely for a secure bond—be generous with the glue.Attach Black Shell Spots: Use the labeled parts (R for Right and T for Top) and fit the other pieces into their unique slots.Glue on the Spikes: Some may fit tightly; twist to fit them snugly.Attach the Beige Chest Shell Pieces: Flat printed edges face down.Secure the Legs: Once the beige c