Thingiverse
Dry Box Spool Hanger Bracket
par fardog
481
Téléchargements
323
Likes
2
Makes
A spool hanger bracket for your drybox, designed to work with a 32mm dowel rod. The angle was meant to match a [44qt Ziploc WeatherShield storage box](https://smile.amazon.com/IRIS-USA-Inc-WeatherShield-Storage/dp/B07H2PZYNF) (Amazon link, non affiliate) but probably it'll work with most similar containers, so long as they're about 2mm thick. In that container, you can safely fit 8 1kg spools.
The Fusion 360 archive `.f3d` is included if you need to make any changes.
You might be interested in [this hygrometer mount](https://www.thingiverse.com/thing:3097889), which goes nicely in a dry box.
# Installation
You'll need the following parts:
* 12x M3x20mm socket cap bolts
* 12x M3 square nuts
* 32mm dowel rod, cut to length
The assembly is straightforward: drill the holes the screws will go through, insert the square nuts into the slots on the inner part, and screw them together, sandwiching the box in between.
The Fusion 360 archive `.f3d` is included if you need to make any changes.
You might be interested in [this hygrometer mount](https://www.thingiverse.com/thing:3097889), which goes nicely in a dry box.
# Installation
You'll need the following parts:
* 12x M3x20mm socket cap bolts
* 12x M3 square nuts
* 32mm dowel rod, cut to length
The assembly is straightforward: drill the holes the screws will go through, insert the square nuts into the slots on the inner part, and screw them together, sandwiching the box in between.
fardog publie également sur
23 modèles supplémentaires sur 1 autres plateformes
Vous avez imprimé ce modèle ? Connectez-vous et partagez votre make !
Connectez-vous pour laisser un commentaire
Se connecterPas encore de commentaires – soyez le premier !
