DRZ400S Front Fork Caps

Crash/rock protection for the bottoms of the front forks on a DRZ400S. This file was designed to allow access to the adjustment screw on the bottom side of the fork. There is text labeled on the side of the cap showing which direction to turn the adjustment screw. Turn counter clockwise to soften the suspension, turn clockwise to harden. Also embossed is abbreviated directions on how to return the fork to the factory position.

Note: The inner bottom of the cap is tapered to promote drainage of water and sand to prevent corrosion.

Installation:
Before installing sand away any jagged edges on the fork bottoms and clean with isopropyl alcohol. Test for a snug fit. If the caps can be removed by hand then line the outer circumference of the bottom of the fork with a strip of electrical tape. The cap should not be removable by hand. Tap the cap softly until fully seated with a rubber mallet. No glue is required or recommended. When the cap is destroyed or worn beyond functionality sim