Thingiverse
Drzzs Pixel Pro v2 Case
door netnutmike
1
Downloads
0
Likes
0
Makes
### What is this thing?
If you are into LED strip lights and some of the cool ways you you can control them and you have ever searched youtube, you probably have found Drzzs.
He has a controller that comes with WLED pre-installed called the PixelPro V2.
This design is a case that holds the PixelPro V2 securely and allows you to mount it walls, under cabinets and more.
### Printing it
If you print this with the top and bottom of the case on the print bed there should be no need for any support.
### Putting it Together
This is a snap case that snaps together. Also, the pixelPro has no mounting holes so this design has little snaps to hold the PCB in place as well.
To snap in the PCB, put the side furtherest away from the screw terminal in first under the little tabs inside then push the side with the screw terminals down until it snaps.
If you are into LED strip lights and some of the cool ways you you can control them and you have ever searched youtube, you probably have found Drzzs.
He has a controller that comes with WLED pre-installed called the PixelPro V2.
This design is a case that holds the PixelPro V2 securely and allows you to mount it walls, under cabinets and more.
### Printing it
If you print this with the top and bottom of the case on the print bed there should be no need for any support.
### Putting it Together
This is a snap case that snaps together. Also, the pixelPro has no mounting holes so this design has little snaps to hold the PCB in place as well.
To snap in the PCB, put the side furtherest away from the screw terminal in first under the little tabs inside then push the side with the screw terminals down until it snaps.
Heb je dit model geprint? Inloggen en deel je make!
Log in om een reactie achter te laten
InloggenNog geen reacties – wees de eerste!
