DSLR Shoulder Rig

This parts-pack is in WIP state. Files may change without notice.

Part list for the basic configuration you will need:
clamp_2level (2x) - Clamps secondary rods to the primary ones.
clamp_basic (xx) - Basic clamp, every other clamp in this design is based around this.
clamp_camerapad (2x) - Used for clamping the camera pad to the secondary aluminium rods.
clamp_ring (2x) - Main clamps, used for clamping the secondary, tertiary, quaternary and quinary rods. It's the biggest part in this design, so I made a version that is cut in the middle (clamp_ring_half.stl).
mount_camerapad (1x) - Used for mounting the camera to the clamp_camerapad.
mount_followfocus (1x) - Used for mounting the motor for the focus control.
tensioner_followfocus (1x) - Used to tighten the drivebelt.
3 meter long, 15mm wide aluminium rods and a bunch of M6 hex nuts and bolts.

Image description: (rods.png)
Rods:
Red - Primary rods, they lengh 510mm, used to mount the shoulder pad (not designed yet).