Dual Garbage Can

Needed to save room by not having two separate recycle bins in the kitchen. Decided to split a 5 Gallon Home Depot pail into 2 sides for dual bags.

Print Thing file twice, one for each side of pail.

Tools required:
Has 2 x 4 mm diameter holes. Needs 2 coat hangers cut to length (min 14 cm) or rods or long screws. I used 2 pieces of coat hanger cut to length and used a bit of duct tape to wedge them into the holes.

Optional piece of cardboard to divide the pail. There are slots on the bottom of the print to support a piece of cardboard cut to size.