Ducktales Hueforge

Ducktails (1987) HueforgePrint at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmYou can scale X and Y, but NOT Z! The Model is 200x132mm in sizeYou may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 1.8mm and the Actual Depth is 1.8mm Filaments Used: PLA PolyLite Black Transmission Distance: 0.3 PLA PrimaCreator Easy Grey Transmission Distance: 3.6 PLA PolyLite White Transmission Distance: 5This print uses 3 unique filaments Swap Instructions: Start with Black At layer #7 (0.64mm) swap to Grey At layer #15 (1.28mm) swap to White for the rest. Boost MeBoost me to support my creations! Thanks a lot!