Thingiverse
Dummy stepper Slim remix
von LordOfNecromancy
4
Downloads
5
Likes
0
Makes
This is a remix of race12001's.
Remixed to make lighter and smaller for less weight on the extruder assembly.
Mk3 is smallest and lightest weighting about 2.5g instead of 20g of original design.
I used two 20mm shcs
Do this at your own risk
I pulled the cables back for the hotend and sensor, and unplugged from the mainboard.
Changed heat up settings on machine OFF for RIGHT extruder and change its temp to 0. Also removed the right extruder from the slicer software .
Use ABS
Remixed to make lighter and smaller for less weight on the extruder assembly.
Mk3 is smallest and lightest weighting about 2.5g instead of 20g of original design.
I used two 20mm shcs
Do this at your own risk
I pulled the cables back for the hotend and sensor, and unplugged from the mainboard.
Changed heat up settings on machine OFF for RIGHT extruder and change its temp to 0. Also removed the right extruder from the slicer software .
Use ABS
Hast du dieses Modell gedruckt? Einloggen und dein Make teilen!
Melde dich an, um einen Kommentar zu hinterlassen
AnmeldenNoch keine Kommentare – sei der Erste!