Dune 2 poster - Hueforge

Hueforge of dune 2 posterThe photos shows the result in 200*172mm and a nozzle of 0.4 You can change the X and Y dimensions but do not change the Z dimensions You must define the printing parameters indicated in the description below and change the filament on the indicated layers. You can use filaments other than those indicated, but the result will differ. You can use any black PLA Hueforge description Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 171.55x200mm in size You may print at higher layer heights below the Min Depth of 0.48mm The Max Depth is 2.6mm and the Actual Depth is 1.5mm Filaments Used: PLA BambuLab Basic Black Transmission Distance: 0.6 PLA BambuLab Basic Blue Gray Transmission Distance: 3 PLA BambuLab Basic Brown Transmission Distance: 2 PLA BambuLab Basic Orange Transmission Distance: 7 PLA BambuLab Basic Sunflower Yellow Transmission Distance: 4.5 PLA BambuLab Basic Jade White Transmission Distance: 5 This print uses 6 unique filaments Swap Instructions: Start with Black At layer #6 (0.56mm) swap to Blue Gray At layer #7 (0.64mm) swap to Brown At layer #8 (0.72mm) swap to Orange At layer #9 (0.8mm) swap to Sunflower Yellow At layer #15 (1.28mm) swap to Jade White for the rest.