Thingiverse
Duplicator 7 - Spatula / Flake scooper
von M600
207
Downloads
146
Likes
2
Makes
Scrap the FEP sheet from any debris in the VAT.
The size is exactly the same as the original tank on the Duplicator 7.
LARGE: 2mm opening, will hold large chunk of cured resin. Normal flow rate.
SMALL: 1mm opening, catch everything. Low flow rate. Be carefull and slow.
Once all the bed have been done, till it a bit and lift up the gunk.
Rinse in alcohol or water, doesn't matter.
Repeat.
---
Some model are not there, you can find more here: https://www.cgtrader.com/M600
The size is exactly the same as the original tank on the Duplicator 7.
LARGE: 2mm opening, will hold large chunk of cured resin. Normal flow rate.
SMALL: 1mm opening, catch everything. Low flow rate. Be carefull and slow.
Once all the bed have been done, till it a bit and lift up the gunk.
Rinse in alcohol or water, doesn't matter.
Repeat.
---
Some model are not there, you can find more here: https://www.cgtrader.com/M600
M600 veröffentlicht auch auf
13 zusätzliche Modelle auf 1 weiteren Plattformen
Hast du dieses Modell gedruckt? Einloggen und dein Make teilen!
Melde dich an, um einen Kommentar zu hinterlassen
AnmeldenNoch keine Kommentare – sei der Erste!
