DURAMIC Bambu Lab AMS Cardboard Spool Adapter Ring

This adapter system wraps the edges of a DURAMIC 1kg 199x66mm cardboard spool in order to:provide smooth rotation within a Bambu Lab AMSprevent carboard debris from depositing within a Bambu Lab AMSFeatures:ReusableDURAMIC nameplate for easy identification when reusingInstructions:Print this model twice for a single spoolAffix one spool ring adapter on each side of the DURAMIC spoolSee attached photosNotes:Shown as printed with Bambu Lab PLA Basic at 0.2mmConsiderations:Print Material: Please print with a basic PLA or PETG to minimize any shrinkage.Too Tight? Too Loose? Cardboard expands with humidity and contracts when dried. A cardboard spool that has absorbed too much moisture may cause the adapters to fit very tight. Placing the spool in a filament dryer, such as the SUNLU S2, for a bit should resolve this. Note, you should not dry the spool with the adapters attached as they can warp in the heat. Keep in mind that after a long drying session the adapters may fit too loose. This sh