Dusk

by Corp

4 Downloads

9 Likes

0 Makes

Download Model

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 200x200mm in size. You can adjust the X and Y but Z must remain the same.You may print at higher layer heights below the Min Depth of 0.48mmActual Depth is 2.2mm Filaments Used:PLA PolyLite Black Transmission Distance: 0.3PLA BambuLab Basic Blue Gray Transmission Distance: 3PLA BambuLab Basic Brown Transmission Distance: 2PLA PolyLite White Transmission Distance: 5PLA PolyLite Grey Transmission Distance: