dust collection - DKSTUDIO

适用于P1P/P1S因为没有X1C 无法测试是否匹配机器的螺丝位和磁铁来固定通过离心力将排出的空气中颗粒粉尘收集并降落到瓶中打印无需支撑烟囱模块可以嫁接增高收集瓶口尺寸为普通饮料瓶 可以安装矮的饮料瓶 或者打印我的瓶子模型（花瓶模式） 品质:层高: 0.2mm强度:墙层: 3顶层: 3底层: 3填充: 15%其他:设置 自动Brim无需支撑 额外需要:3颗 - M3 x 8mm 螺丝1颗 - m3螺母 （如果够紧可以不用）6颗 - 10x2 圆形磁铁-----------------------machine translationApplicable to P1P/P1SBecause there is no X1C, it is impossible to test whether it matches.Machine screws and magnets to fixThe particulate dust in the discharged air is collected by centrifugal force and dropped into the bottlePrinting without supportChimney modules can be grafted to increase heightThe size of the collection bottle mouth is that of ordinary beverage bottles, and short beverage bottles can be installed.Or print my bottle model (vase mode) quality:Floor height: 0.2mmstrength:Wall layers: 3Top level: 3Ground floor: 3Fill: 15%other:Settings Automatic BrimNo support required Additional requirements:3 pcs - M3 x 8mm screws1 piece - m3 nut (if it is tight enough, it can be omitted)6 pcs - 10x2 round magnets