Dust Collector Pipe Mounting Bracket

DescriptionThis is a bracket for mounting dust collection pipe to anything you can put a screw in. The bracket snaps together with a double dovetail and should not need extra fasteners. An area for a captive m4 hex nut and 20mm socket head cap screw is provided for those who prefer to lock it down tight. There is a small slit in the side for separating the halves with a screwdriver should you need to remove the bracket in the future. The holes in the base provide clearance for up to a #10 cabinet screw. I recommend using cabinet screws (ie: washer head screws) for mounting to avoid splitting the model along the layer lines as can easily happen with a typical wood screw with a wedge shaped head. Available Profiles4 in SDR35 PVC pipe6 in SDR35 PVC pipe (needs fit verification)6 in spiral pipe (needs fit verification)3 in Schedule 40 drain pipePrint notesThis printed very well in PETG (as seen in pictures), but it should print just fine in PLA.Supports are not required, but are included i