DVO Fork Bleed Cup

This is an oil bleed cup/catch container used to service/bleed the damper unit in DVO 35MM stanchion forks. This cup is meant to mate to the 32MM hex nut shape of the fork damper, creating a practically leak-free seal.

With this cup and a little patience, it is possible to perform a full oil change on the damper without any damper disassembly, as follows:

- Remove damper from fork
- Remove 2.5mm bleed screw
- Turn damper upside down, cycle it many times to drail old fluid. Leave upside down overnight preferably.
- Attach cup, fill with fresh (3WT) oil.
- Cycle damper repeatedly while keeping oil level up in cup.
- Let damper sit upright for a few minutes at a time, to allow air bubbles to rise
- Keep cycling damper until no air bubbles are seen coming out.

It would be ideal to print this using a light colored/transparent filament, but I happened to have black on hand at the time I made it.