Dwights pumpkin mask

Halloween Dwight Scrhute mask!Components needed:- 32 M3x10 (I used m3x12) screws- 32 M3 nuts- 56 7x2 round magnets- 3 small wood screws (I used 3 12mm screws)- CA glue (superglue) or the adhesive of your choiceI recommend leaving the glueing process for the end of the assembly, so if you get the parts on the wrong position, you can easily swap them around.To assemble the mask, just follow the print number in an anticlockwise order (looking top down).Starting with P1, P2 should be the next part, and it will be screwed to the "free" side of P1, P3 should be on the "free" side of P2, and so on. To join these parts, use 3 m3x10 (or m3x12) screws and nuts, don´t tighten the screws just yet. The first half uses parts from 1 to 6, and the stem will be joined to this half. The second half uses parts from 7 to 11. The pattern formed on the top hole of the pumpkin should match the shape of the stem. Once you have all the parts joined by screws, you will have to glue them, so the