Dye DAM Magazine loading tool

This is a loading tool for loading Dye DAM magazines, used by the Dye DAM, MG100 and some custom builds that use the magazine system. The loader consists out of 3 printed parts, and 4 screws and two springs. The screws used can be bought from any hardware store, if you cant find the springs locally, you can order them easily from china. It took me just 5 minutes to find the correct springs needed on aliexpress. :)

The slide also has optional screw holes, those can be used to reinforce the slide part, so your loader won't break off incidentally. Another option would be to print this part in either ABS or PETG for extra strength. The springs needed (see pic) should be about 10mm diameter, (D) 35mm long, (L) and the spring thickness of about 0.8-1.0mm (d)

Assembly is a bit tricky, because of the springs, but once you have them in place, screw the top part onto the bottom part with 4 wood screws, and you should have a working loading tool.

To use: Place a old hopper or loader on