DynaVap Slim Stash

FeaturesSnug-fit cylinder that securely stores your DynaVap vaporizer without wiggle room.Dual-well storage system to keep both fresh herb and AVB under wraps with a single omni-directional lid.Does not require an expensive diametrically magnetized magnet! This case was designed to use a single size of magnet to keep costs to a minimum.All cases have an ‘Extras’ option, a debowling spike and a loading tamper.CompatibilityThis stash box can fit M and Omni variants, both 92mm (Short) and 109mm (Long).Hardware RequirementsThe basic print requires at least nine (9) 6x2mm neodymium magnets. Each of the funnel lids will require two (2) additional magnets.Print SettingsThe primary Case part has a built-in support object to handle the small overhang above the storage cylinder, you shouldn't need to use any generated supports with this model if you print with a layer height of 0.2mm or less. A brim can be used to maintain foundational integrity if necessary.Assembly InstructionsStart with m