E-Cig IStick Pico case

My E-cig had tendencies to leak so I made this case to protect me (and my pockets) from the liquid. It is also a great thing to protect and/or custom it. You can had a tissue or a little sponge at the bottom of the cover (vap_2) to drain the leaked liquid.

The openning on the background of vap_1 is to allow more deformation from the material and have a better "grip" of the e-cig. It's quite the same for vap_2.
To release the e-cig : press vap_2 where the red arrows are with your hand under the thing. If it don't come, shake it a bit. If it still locked, break the part and re-print it by increasing the size of 1% or 2%.

I made it to be printable on my machine, I can't assure you it will work on yours and the dimensions will be perfect.

I have an IStick Pico with a 2mL tank, I have no idea if it would work with a bigger tank or another e-cig (I doubt). You can inspire you with my design if you want to, here is the share link from OnShape : https://cad.onshape.com/documents/ec5