E3D Chimera Mount for D-Bot (optional BLTouch)

This is a screw-on bracket for the D-bot print carriage for the E3D Chimera hot end. There is another option on here, but it replaces the entire front plate of the carriage, and I wanted to be able to more easily remove it without having to re-tension the betts, etc, by disassembling the carriage assembly itself. This screws onto the four mounting bolt locations used by the stock assembly without any modification.

There are two versions, with and without a bracket for a BLTouch sensor, and there's a matching tubing bracket for the top of the carriage, spaced to match the two bowden tubes coming out of the Chimera.

The extruder can be bolted to the bracket using the rear or the top screws. I actually did both -- two on top and one in the rear.

I *think* this might work with a Cyclops, as I believe the dimensions are the same, but no promises. If you try it, let me know if it works.

Edit: E3D seems to have made a change to the hot-end heat-sink. The newer ones are 32mm wi