E3D Hemera Dial Indicator Mount

Designed to work in conjunction with the part cooling fan mount made by Hangtight. You can find here:
https://www.thingiverse.com/thing:4042492

Designed to be used with the Sincon brand dial indicator but should work for most styles of indicators. You may or may not need to adjust the probe extension to fit the needs of your specific dial. the outer diameter of the Sincon probe is 4.5mm. The tip of the probe will screw into the end of the probe extension. On the Sincon dial the thread is M2.5.

For the Tightening knob: the required M4x25 bolt is a friction fit into the knob but for the ability to apply extra torque to the bolt I put a dab of super glue prior to inserting the bolt into the knob.

I used a Molex micro fit connector to make the parts cooling fan detachable in order to make the mount multi purpose.

Printed all parts 100% infill, 4 top/bottom layers, 3 walls

Parts List:
Molex Micro fit connector or equivalent 2 pin connector (for 5015 fan)

2x M3x10 bolt an