E3D Hemera Turbo Blower Mount

Reworked E3d's Hemera Blower mount for my CoreXY

Should work with any 3d printer with 15 mm room in front of Hemera

Extended mount with more plastic around the holes and to the blower shroud

one screw for blower is bevel headed (top left) to mount blower and one screw beveled for hemera Top right hole relocated for hemera mount hole

so three screws mount to blower and three to hemera
two bottom holes in blower need drilling out to 3mm
Added E3D_HEMERA_4010_TurboBlower_Shroud2.stl : more air flow on part and not on HotEnd

Don't over tighten stuff, plastic!

PetG filament
support
20% fill
2 M3x6mm Flat head screws
2 M3x10mm ( you have to grind the heads smaller to fit in cavity of blower) from the 5.5mm to 4.5mm cavity room. I used another screw to hold bolt to grind head (see pictures)

If link is dead, search the description

40mm Turbine Turbo 4010 40x10mm Brushless Dual Ball Bearing

https://www.amazon.com/Cooling-Turbine-40x10mm-Brushless-Bearing/dp/