E7 shoes

Use TPU, preferably 0.6 nozzle

---

Video: https://www.youtube.com/shorts/ZXtAueYBw-Y

Website: https://www.riverfamily.art/

---

Bambu Studio / Orca Slicer settings:

Global, Yume_1, Yume_4:

- layer height: 0.28mm
- line width sparse infill: 0.9mm
- line width walls: 0.65mm
- wall loops: 0
- top shell layers: 0
- bottom shell layers: 0
- sparse infill density: 43%
- Infill pattern: Grid
- Infill anchor: 1000 (unlimited)
- Max infill anchor: 1000 (unlimited)
- Infill direction: 0°
- infill/wall overlap: 90%
- Detect narrow internal solid infill: no
- Speed sparse infill: 18 mm/s
- Reduce infill retraction: no
- Brim type: Outer, 9mm width, 0mm gap
- Enable support: yes, normal, auto, 1°, make a 100x150 support enforcer

Yume_2:

- Walls: 2
- Sparse infill density: 100%
- Sparse infill pattern: rectilinear
- Infill direction: 45°


Yume_3:

- Line width sparse infill: 0.6mm
- Sparse infill density: 33%

Filament:

- Retraction: 2.4mm
- Wipe: no
- Z hop: 1.2mm, Normal type
- Max vol