Easel for Hueforge

This is my easel for hueforge paintings and other 2d- art!Assembly instructions:clip the leg to the stand, no glue needed. If the leg is not stable to the easel, just use a small drop of glue and glue it. Recommended filament: PLAHotend: 0,40mmPrint time: 0:39hassembly time: 1 minute Print instructions:layer height 0,20mm2 wall loopstop/bottom shells 4 layerstop/bottom shell thickness 0,80mmsparse infill 10%sparse infill pattern “gyroid”enable supportSupport type “tree manual”Support style “tree slim”Support → enable “on build plate only”Support/object xy distance 0,5mmBefore printing, make sure your build plate is clean and apply some adhesive. Wash the build plate with oil free soap and wipe it off with some paper towels. For build plate adhesion, apply a thin, even coat of your preferred adhesive. I repeat the process every 5-6 prints.Bad build plate adhesion is not related to the model.Please check out my other models https://makerworld.com/en/u/1597610120 and leave me a like and a