Easter Bunny Hueforge

Print at 100% infill with a layer height of 0.2mm with a base layer of 0.2mm The Model is 200x200mm in sizeYou may print at higher layer heights below the Min Depth of 0.6mmThe Max Depth is 2.2mm and the Actual Depth is 2.2mm Filaments Used:PLA BambuLab Basic Black Transmission Distance: 0.6PLA BambuLab Red: 2PLA BambuLab White: 5This print uses 3 unique filaments Swap Instructions:Start with BlackAt layer #5 (1mm) swap to WhiteAt layer #6 (1.2mm) swap to RedAt layer #8 (1.6mm) swap to white for the rest