MakerWorld

Hueforge & Lithophane

Easter He is Risen Cross Bookmark Hueforge

von Viola's HueForge · Hueforge & Lithophane

19 Downloads

13 Likes

14 Makes

Project: EASTER HE IS RISEN CROSS BOOKMARK STL.hfpPrint at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 47x150mm in sizeYou may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 1.2mm and the Actual Depth is 1.2mmFilaments Used: PLA BambuLab Basic Black Transmission Distance: 0.6 PLA Sunlu Meta Taro Purple Transmission Distance: 3.5 PLA BambuLab Basic Yellow Transmission Distance: 6Boost MePlease consider sending me a boost! :)This print uses 3 unique filamentsSwap Instructions: Start with Black At layer #6 (0.56mm) swap to Taro Purple At layer #10 (0.88mm) swap to Yellow for the rest. ***Note: I chose to use Gold silk as pictured in the model picture.***

bookmark book mark cross golden he is risen god HUEFORGE HueForge Hueforge hueforge easter easter 2025 new easter 2025new easter 2025 read

Kategorie

Hueforge & Lithophane

Quelle

MakerWorld

Veröffentlicht

29.03.2025

Aktualisiert

30.04.2026

Was du zum Drucken brauchst: Anfänger Niedrige Konfidenz

Einteilig

Supports 1/3

Zusammenbau 0/3

Einstellungen 1/3

Druckbett 0/3

Nachbearbeitung 0/3

Drucker

FDM / FFF

Dateiformat

STL

Material

PLA, Silk PLA

Mindest-Druckbett

150 mm (Mittel)

Software

Cura, PrusaSlicer o. Ä.

Noch keine Bewertungen

Noch keine Kommentare – sei der Erste!

Easter He is Risen Cross Bookmark Hueforge

Ähnliche Modelle

Zur Sammlung hinzufügen