Easy and fast Insert Press

Quick and Easy to Print Insert Press

This Press will hold its Head vertical at any time, but its moving back and forth a little

all you need is:

4x M6x45mm Socket Head Srews
4x M6 Nut
Around 150gr. of Pla, or Filament of your Choice.
1x Leftover Board about 100x200x10mm
2x Wood-screw length according to Board height + 15mm model height

optional: M3 Insert + Screw with handle for securing the tool


For using as hot melt Insert Press you will need a Solder Iron

I recommend printing the Head with a Brim as it intends to losen from bed

The Current Head will have a 18mm hole with an 1 degree angle opening to the bottom.


I added a little screw with a Spring on it to stop from sinking to the board.