Easy Change Nozzle Wiper

Easy Change Nozzle Wiper
====================

Edit: 27/12/2024 - Now with Brush Holder V2!
- Adds a small slot for a piece of rubber to help remove any extra filament still stuck on the nozzle.

Mounts to the Y-carriage using the hot bed springs, little bit of double sided tape and a binder clip.

The Silicon wiper is attached via magnets - easy to remove for cleaning or changing the silicon wiper.

**NOTE:** Use the NOZZLE_WIPER_MOUNT file as reference and create your own mount for your printer's Y-Carriage. When you design the Y-Carriage mount make sure it is tall enough where the only the bristles of the brush is above the hot bed.
See the two that I made for my printers.
NOZZLE_WIPER-MOUNT_I3 - WanHao Di3
NOZZLE_WIPER-MOUNT_TEVO - Tevo Tarantula (non-pro/large bed)

Things you'll need:
- Silicon Wiper - I used the Bambu Labs A1 silicone brush
- 4x magnets - Dia 6mm x 1.75mm

For brush holder V2 add:
- Small piece of rubber (e.g bicycle inner tube) cut to size