Easy Install SKADIS (A1 Mini)

I have created my Easy Install Skadis panels so it can be printed on an A1 Mini. Individual boards can be combined to make larger panels. The panels can be assembled BEFORE hanging it on the wall, which makes installation a breeze. The panels can be configured to have nice edges around the perimeter, and every slot is usable, even at the connection points. The boards use standard Skadis specs, with rounded edges, so most accessories should fit just fine. There are 10 unique boards in this set: Black, Orange, White, Light Blue, Pink, Green, Blue, Red, Yellow Purple. Each individual board measures 160mm x 160mm. The photo below shows how each board fits within a panel. There are 3 different types of connectors: Corner, Two-Way, Four-Way. These press-fit onto the back of the boards, and allow them to be assembled into panels before installing on the wall. ASSEMBLY INSTRUCTIONS To assemble the panels, you'll need 1/2 - 5/8" long screws with a flat head (Countersink). The head diame