Easy Lithophane Light Box (Landscape)

Easy print lithophane picture box, simple clean design for images with a 4x3 ratio. Includes a small hole in the back for a small wire to connect an LED light. Can also be used with a battery powered light. Below are all of the setting used along with the filaments and LED light I used for this project. Lithophane picture STL was created using Lithophane Maker (Curved):FYI: Ensure your image has a ratio of 4x3 before converting.URL: https://lithophanemaker.com/Curved%20Lithophane.htmlFrame Option: FramedLithophane Resolution: 0.3Lithophane Height: 110X Span: 136.4mm (Note: this field is auto populated, check it again after inputting all the settings)Angle: 75Frame Width: 2.5Frame Height: 5Overhang Angle: 90Maximum Thickness: 3.6Minimum Thickness: 0.6Picture Spacing: 5Before printing, check dimensional size of your STL file in the slicer. It should match what is below:X (Width): 135.40mmY (Depth): 26.06mmZ (Height): 110mm Lithophane Filament used:Polymaker Matte PLA Filament 1.75mm Whit