Thingiverse
EASY Lithophane Stand
por N8DecentlyGr8
90
Descargas
73
Likes
0
Makes
Super Simple Lithophane Stand! Looks good on bookshelves and can be used as a decorative bookend as well!
Where I made the Lithophane:
http://3dp.rocks/lithophane/
Lithophane Settings:
Type: Outer Curve
Maximum Size: 130mm
Thickness: 2mm
Border: 10mm
Thinnest Layer: 0.8mm
Vectors per Pixel: 4
Base/Stand Depth: 0
Curve: 0
These lithophane settings should produce a lithophane that will fit snuggly with the stand STL with a little bit of shaving of the bottom border of the lithophane. Remember to always print Lithophanes with 100% Infill.
Light used for the stand:
https://www.amazon.com/gp/product/B07XBRH6MX/ref=ppx_yo_dt_b_asin_title_o03_s00?ie=UTF8&psc=1
If you're looking for a good article to create a lithophane, here is the article I used:
https://all3dp.com/2/how-to-3d-print-your-own-lithophane/
Where I made the Lithophane:
http://3dp.rocks/lithophane/
Lithophane Settings:
Type: Outer Curve
Maximum Size: 130mm
Thickness: 2mm
Border: 10mm
Thinnest Layer: 0.8mm
Vectors per Pixel: 4
Base/Stand Depth: 0
Curve: 0
These lithophane settings should produce a lithophane that will fit snuggly with the stand STL with a little bit of shaving of the bottom border of the lithophane. Remember to always print Lithophanes with 100% Infill.
Light used for the stand:
https://www.amazon.com/gp/product/B07XBRH6MX/ref=ppx_yo_dt_b_asin_title_o03_s00?ie=UTF8&psc=1
If you're looking for a good article to create a lithophane, here is the article I used:
https://all3dp.com/2/how-to-3d-print-your-own-lithophane/
¿Has impreso este modelo? Inicia sesión y comparte tu make.
Inicia sesión para dejar un comentario
Iniciar sesiónAún no hay comentarios – ¡sé el primero!
