EasySMX X20 Dual Controller Stand

A stand for two EasySMX X20 controllers, featuring EasySMX logo at the front.In the .3MF file, objects are pre-oriented and pre-sliced for P1S Combo and PETG filament. You can also print in PLA.Note: If you have the patience, finer layer thickness WILL improve final result, due to the way the objects are oriented on the plate (which was done to optimize the print for minimal filament changes, and thus minimal waste and print speed).If you don't have a colour 3D printer, you can either remove the parts Logo1, Logo2, Logo3 in the slicer, so that the logo comes out embossed, or you can print the entire plate on a single color (ie change filament of Logo1, Logo2, Logo3 objects to the same color as the body object in Plate 1), and you have a “no logo” version. If you do this, you can also re-orient the object and place it on its side, for better print quality.As for the .STL files, the logo is embossed. Take care of object orientation, as the .STL files are not pre-oriented !Assembly sh