Thingiverse
EDC minimal wallet
por fbuenonet
341
Descargas
308
Likes
0
Makes
It is a wallet of very small dimensions that has a pocket to carry up to 6 credit cards and another for documentation. In addition, using the rubber band, several bills can be held.
The pocket is made with oiled leather to give it an aged look.
The assembly is very simple:
1.- You have to print the two pieces with a filling of at least 40% to have good consistency.
2.- In the svg file is the silhouette of all the pieces, but you only have to cut (preferably with laser) the 3 pieces of green color, which form the pocket.
3.- Next, the 11 M2 nuts are inserted using a soldering iron.
4.- Depending on the thickness of the leather used, the pocket is fastened with M2 screws. For a 2.5 mm leather, 2 M2x10 screws and 9 M2x12 screws are needed
5.- It is necessary to cut an elastic band of 20 mm wide and with the appropriate length so that the portfolio is firmly closed. The tape is sewn to the small piece so that the union is not visible and stiffens the assembly.
If you find m
The pocket is made with oiled leather to give it an aged look.
The assembly is very simple:
1.- You have to print the two pieces with a filling of at least 40% to have good consistency.
2.- In the svg file is the silhouette of all the pieces, but you only have to cut (preferably with laser) the 3 pieces of green color, which form the pocket.
3.- Next, the 11 M2 nuts are inserted using a soldering iron.
4.- Depending on the thickness of the leather used, the pocket is fastened with M2 screws. For a 2.5 mm leather, 2 M2x10 screws and 9 M2x12 screws are needed
5.- It is necessary to cut an elastic band of 20 mm wide and with the appropriate length so that the portfolio is firmly closed. The tape is sewn to the small piece so that the union is not visible and stiffens the assembly.
If you find m
¿Has impreso este modelo? Inicia sesión y comparte tu make.
Inicia sesión para dejar un comentario
Iniciar sesiónAún no hay comentarios – ¡sé el primero!
