Eevee Evolution Espeon Hueforge

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 200x200mm in sizeYou may print at higher layer heights below the Min Depth of 1.4mmThe Max Depth is 3.3mm and the Actual Depth is 3.4mmFilaments Used: PLA PolyLite Black Transmission Distance: 0.3 PLA BambuLab Matte Lilac Purple Transmission Distance: 2 PLA BambuLab Matte Sakura Pink Transmission Distance: 3 PLA BambuLab Matte Ivory White Transmission Distance: 3.5This print uses 4 unique filamentsSwap Instructions: Start with Black At layer #20 (1.68mm) swap to Lilac Purple At layer #28 (2.32mm) swap to Sakura Pink At layer #32 (2.64mm) swap to Ivory White At layer #37 (3.04mm) swap to Lilac Purple for the rest. This Hueforge is meant to be a bit thicker than the average Hueforge prints. Artist: Sarah Richford - eeveelutions Espeon