Eevee Evolution Leafeon Hueforge

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 200x200mm in sizeYou may print at higher layer heights below the Min Depth of 1.4mmThe Max Depth is 3.3mm and the Actual Depth is 3.4mmFilaments Used: PLA PolyLite Black Transmission Distance: 0.3 PLA BambuLab Basic BambuLab Green Transmission Distance: 2 PLA BambuLab Matte Grass Green Transmission Distance: 2 PLA Kexcelled Peak Green Transmission Distance: 3.4This print uses 4 unique filamentsSwap Instructions: Start with Black At layer #20 (1.68mm) swap to BambuLab Green At layer #27 (2.24mm) swap to Grass Green At layer #32 (2.64mm) swap to Peak GreenBorder Only Colors from here until the end. At layer #39 (3.2mm) swap to BambuLab Green for the rest.This Hueforge is meant to be a bit thicker than the average Hueforge prints. Artist: Sarah Richford - eeveelutions Leafeon