Eevee Evolution Vaporeon Hueforge

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 200x200mm in sizeYou may print at higher layer heights below the Min Depth of 1.4mmThe Max Depth is 3.3mm and the Actual Depth is 3.4mmFilaments Used: PLA PolyLite Black Transmission Distance: 0.3 PLA BambuLab Basic Blue Transmission Distance: 4 PLA BambuLab Matte Marine Blue Transmission Distance: 0.5 PLA BambuLab Matte Ice Blue Transmission Distance: 3.5This print uses 4 unique filamentsSwap Instructions: Start with Black At layer #30 (2.48mm) swap to Blue At layer #34 (2.8mm) swap to Marine Blue At layer #39 (3.2mm) swap to Ice BlueBorder Only Colors from here until the end. At layer #42 (3.44mm) swap to Blue for the rest. This Hueforge is meant to be a bit thicker than the average Hueforge prints. Artist: Sarah Richford - eeveelutions Vaporeon