Thingiverse
EFX-TEK Parallax PIR Sensor - Motion Sensor
14
Descargas
9
Likes
0
Makes
PIR Sensor
Simple case / Mounting option for the EFX-TEK Parallax PIR sensor including an optional range/limit shield and mounting pins.
The design uses the included mounting pins to secure the board and range cone(optional) to the mounting base. simply push pin thru the circuit board and then all the pieces and touch the outside with a soldering iron.
(PRO-TIP) print the pins in a group of 10 - this will allow for proper cooling. I printed both pieces and the 10 pins. Assemble the 3 units with the pins and simply take a hot soldering iron to the small ends of the pins and flatten them out to hold the parts together.
Stock #: 555-28027
Manufacturer: Parallax, Inc.
http://www.efx-tek.com/topics/pir.html
Simple case / Mounting option for the EFX-TEK Parallax PIR sensor including an optional range/limit shield and mounting pins.
The design uses the included mounting pins to secure the board and range cone(optional) to the mounting base. simply push pin thru the circuit board and then all the pieces and touch the outside with a soldering iron.
(PRO-TIP) print the pins in a group of 10 - this will allow for proper cooling. I printed both pieces and the 10 pins. Assemble the 3 units with the pins and simply take a hot soldering iron to the small ends of the pins and flatten them out to hold the parts together.
Stock #: 555-28027
Manufacturer: Parallax, Inc.
http://www.efx-tek.com/topics/pir.html
¿Has impreso este modelo? Inicia sesión y comparte tu make.
Inicia sesión para dejar un comentario
Iniciar sesiónAún no hay comentarios – ¡sé el primero!