Egg Coaster - Hueforge

Print at 100% infill with a layer height of 0.04mm with a base layer of 0.16mm The Model is 106.95x93.66mm in size You may print at higher layer heights below the Min Depth of 0.48mm The Max Depth is 2.2mm and the Actual Depth is 2.3mm Filaments Used: PLA BambuLab Matte Dark Red Transmission Distance: 1.5 PLA BambuLab Basic Orange Transmission Distance: 5 PLA BambuLab Basic Yellow Transmission Distance: 6 PLA PolyLite White Transmission Distance: 5 This print uses 4 unique filaments Swap Instructions: Start with Dark Red At layer #22 (1mm) swap to Orange At layer #32 (1.4mm) swap to Yellow At layer #38 (1.64mm) swap to White for the rest.