Eggbeater to flat pedal conversion

Here is an attachment to transform CrankBrothers Eggbeater clipless pedals to the flat ones. (If you need to do it for some strange reasons. :) ) Inspired by their Doubleshot series.
You'll need to print this .stl twice for the right pedal (upper & lower halves) and then two more but mirrored - for the left.
Additionally you'll need two sets of:
for the pedals with metal pins
6 M3x6 hex socket head screws
4 M3x20 hex socket head screws
4 M4x18 hex socket head screws
and finally 4 M4 nuts
M3 screws are used as a pins as well as a joint of two halves. (The longer ones.)
M4 with nuts are only for joining halves.

Latest version is available at:
https://a360.co/3GBwRoh

04-nov-21
Added version with the plastic pins for those of you who prefer to save their shoes instead of having much grip
M3 screws you'll need must be within 10-15 mm length