Eggtimer Eggfinder LCD GPS Case "V2"

UPDATE: GPS now sits at a 45-degree angle for better GPS reception. Added 2mm of depth to allow a little more clearance as some battery holders dimensions may be different. Also added a smoothed internal case that will allow for Lipo's instead of a BMS, Charger, and 18650 battery holder.

BUILD NOTES:
When soldering on the SMA/RP-SMA, do that LAST so that it lines up with the hole better. Solder one of the legs, then remove the board to finish the other connections

This case is for the Eggtimer Eggfinder LCD with internal GPS Module that's primarily used for retrieving/finding Rockets. This case was designed to use 18650 Li-Ion batteries, which can be charged via USB-C. Li-Po batteries can also be used, but Li-Ion have a higher capacity for the size and can be stored for longer periods without degradation. You can use any Li-Ion of any capacity that you wish (IE, the average current draw with the back light on is about 120 mAh, so a 1500 mAh 18650 Li-Ion could get roughly 10+hrs per