Eiffel Tower

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm  The Model is 200x200mm in size  You may print at higher layer heights below the Min Depth of 0.24mm  The Max Depth is 2mm and the Actual Depth is 2mm Filaments Used: PLA Prusament Pristine White Transmission Distance: 5.1 PLA Overture Matte Black Transmission Distance: 0.1 PLA Protopasta Dusty Smoke Transmission Distance: 20 PLA Overture White Transmission Distance: 4.4 This print uses 4 unique filaments Swap Instructions: Start with Pristine White At layer #4 (0.4mm) swap to Black At layer #10 (0.88mm) swap to Dusty Smoke At layer #17 (1.44mm) swap to White for the rest.