Elden Ring Dog / Turtle HueForge

For those of you feeling guilty about all that turtleneck meat in your inventory, you can print yourself an Elden Ring Dog HueForge as a tribute.There are two AMS profiles with dimension being the only difference:Small: 72 x 67 x 1.68 mm / 2.8 x 2.6 x .06 inLarge: 163.6 x 152.4 x 1.68 mm / 6.4 x 6 x .06 inA HueForge can take a bit to slice, but all the settings in the slicer are ready for a 0.4 nozzle. Below are the filament swap instructions. Keep in mind that if you use a different brand than I did, the color of the print might vary. Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmYou may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 2.2mm and the Actual Depth is 1.7mmFilaments Used:PLA BambuLab Basic Black Transmission Distance: 0.6PLA BambuLab Basic Gray Transmission Distance: 2PLA BambuLab Basic Jade White Transmission Distance: 5 Swap Instructions:Start with BlackAt layer #8 (0.72mm) swap to GrayAt layer #11 (0.96mm) swa