Thingiverse

eleaf iStick mini slipover case

by skiddyfisk

5 Downloads

4 Likes

0 Makes

This is the best battery, but the threaded connection is weak and cartridges will pop out of alignment when it's in my pocket and gets bumped. The slipover case prevents this issue by securely holding the cartridge and battery in alignment, while remaining as thin as possible so as not to squander the device's delightfully small size.

Mine printed fine at 0.28mm with no supports. Not a difficult print.

Source

Thingiverse

What you need to print this: Beginner Medium confidence

Why?

no supports

Support-free Single piece

Supports 0/3

Assembly 0/3

Settings 1/3

Bed size 0/3

Post-process 0/3

Printer

FDM / FFF

File format

STL

Material

Min. bed size

50 mm (Small)

Software

Cura, PrusaSlicer, or similar

Frequently Asked Questions

Which 3D printer is suitable for eleaf iStick mini slipover case?

Any FDM printer should handle eleaf iStick mini slipover case just fine. It's been printed on machines like Bambu Lab A1 Mini, Prusa Mini+, Creality Ender 3, most FDM printers. A minimum build volume of 50 mm is recommended.

Does eleaf iStick mini slipover case need supports when printing?

No supports needed for eleaf iStick mini slipover case — it's designed to print clean off the bed.

What file format is eleaf iStick mini slipover case available in?

eleaf iStick mini slipover case is available in STL format. These files can be opened and sliced using free software such as Cura, PrusaSlicer, Bambu Studio, or OrcaSlicer for FDM printing, or ChiTuBox and Lychee Slicer for resin printing. The download is provided through Thingiverse.

Is eleaf iStick mini slipover case free to download?

Yes, eleaf iStick mini slipover case is available as a free download through Thingiverse. Always check the license on the original platform to understand commercial use, remixing, and attribution requirements.

No ratings yet

No comments yet – be the first!

eleaf iStick mini slipover case

Add to Collection