Electric Rose 2

by the_bearded_jedi

31 Downloads

52 Likes

12 Makes

Download Model

hueforge rose flower

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 200x200mm in sizeYou may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 2.2mm and the Actual Depth is 1.6mmFilaments Used: PLA+ Sunlu Black Transmission Distance: 0.6 PLA Paramount 3D Mid Century Teal Transmission Distance: 2 PLA Bambu Purple Transmission Distance: 1.4 PLA PolyLite Pro Magenta Transmission Distance: 1 PLA PolyTerra Sunrise Orange Transmission Distance: 2 PLA Ov